1. Dress
Fold and press strap1cm(0.4”) in horizontally to the wrong side.
Then fold and pin in half line with the right side and sew down the short side as shown.
Turn it right side out. Refold each one in half along the long edge and press.
Open the fold and fold each raw edge into wards the center and press again.
And edgestich at top end and along length of strap.
Repeat with the the other strap .
Sew the baste stitch with straps and Top front for fixing each other as shown.
Match the Top front-ouside fabric and lining together. Face the right sides.
Pin & sew across the top to secure the straps and ruffles in place.
Making sure that the straps and ruffles are tucked in nicely between two piece of top front ,
sew down each side as shown.
Trim off the extra seam, only a few mm left.
Snip each corner to make the flipping easier.
Turn it inside out.
Sandwich the top front between front bands. Sew along the bottom.
Match the front band and back band.
Face the right sides. Stitch as shown, keeping opening unstitched.
Press seams open.
Sew a parallel row of long(gathering) stitches around the front skirt.
Face the right sides of skirt together.Pin on and stitch along the side lines.
Serge or zigzag red line at the edge as shown. Press seams towards front.
To gather the front skirt simply hold the fabric still in one hand and pull one of the loose threads with the other.
Do this on both sides until your front skirt is the same width as the front waist band.
Sew the waistband-outside to the skirt as shown.
Face the right sides. And fold and press seam 1cm(3/8”) of waistband-inside in horizontally to the wrong side.
Fold the waistband down lengthwise along the pressed fold.
Top stitch along the bottom of the waistband (about 1/8 inch from the seam between the waistband and the skirt), making sure you're catching the inside of the waistband.
Using a safety pin, thread your elastic through the Back casing. Before the end of the elastic is about to be pulled completely into the casing, sew up the waistband along the same line as the skirt’s side seam catching about a 1/2” of the elastic. Continue pulling the elastic through until it’s about 1/2 “ past the other side seam. Close the openings with hand stitching.
On the wrong side of skirt, fold twice concealing the cut edge and press. Sew the hem as shown.
2. Pants
Sandwich the top front between front bands. Sew along the bottom. Press seams open.
Match the front band and back band. Face the right sides.
Stitch as shown, keeping opening unstitched. Press seams open.
To sew, start by stitching the pocket facing to the pocket edge, right sidestogether.
Repeat on other leg.
Turn the pocket facing to the wrong side of the pants and press the seam edge.
Top this edge if desired, as shown above.
On the wrong side of the pants place the pocket against the pocket facing,
right sides together, and stitch the curved edge.
Baste the top and side of the pocket into place where they overlap the pants front.
Now pleat the pants. Use pins to secure them then iron press them to keep the shape!
Keep repeating this pleating process from the both sides to the center.
For ease of work. Sew a sparsely spread out stitch along the top of the pleated cloth to
hold the pleats together.
Right sides of fabric together.
Once you sew the inner leg portion of the pants, flip one of the legs right side out.
Tuck the pant leg that’s right side out inside the wrong side out pant leg with the crotch part lined up.
The two pant legs should have the right sides touching.
Pin the curves together and sew one big U that’s the curve.
This is the curve that’s from the crotch to the top of the waist.
Then if you have a serger, you can serge the seam allowance as shown.
If you don’t have a serger, please do a zig zag or serge the seam allowance.
Sew the waistband to the pants as shown.
Fold the waistband down lengthwise along the pressed fold .
Top stitch along the bottom of the waistband (about 1/8 inch from the seam between the waistband and
the pants), making sure you're catching the inside of the waistband.
Using a safety pin, thread your elastic through the Back casing.
Before the end of the elastic is about to be pulled completely into the casing, sew up the waistband along the same line as the skirt’s side seam catching about a 1/2” of the elastic.
Continue pulling the elastic through until it’s about 1/2 “ past the other side seam.
Close the openings with hand stitching.
Fold twice concealing the cut edge and press. Sew the hem as shown.
Make button holes at the top front. Hand stitch buttons at the straps.
3. Romper
댓글
댓글 쓰기