Sewing tutorial-24. R69 sewing pattern-strap dress, romper, pants



(1) Fold 0.5cm(3/16”) twice concealing the cut edge  of frill (straight line) and press.  Sew the hem as shown. (2) Sew a parallel row of long(gathering) stitches  around the frill. (Stitch length long, tension low/loose) (3) Gathering the frill as picture.


(4) Fold 1cm(3/8”) three edges(ecxpt front edge) and press. Then fold in half widthwise as shown.  


(5) Sandwich a frill between  strap as shown.Then Sew edges of the straps as shown. 





(6) Press along one marked line and stitch along one marked line of front piece. 
Repeat pressing and stitching along  remaining marked lines. 
Press all pin tucks each half towards the nearest side seam as shown. 

(7) Apply interfacing to the wrong side of facing. Serge the bottom line. 

With right sides together pin straps into place on front.  

(8) Now with the right sides of the front and  facing each other, sew along the top edge as shown. Trim the points on any sharp angles and cut notches in the  seam allowance along the curve.Turn the piece right-side-out. Press the edges. 


(9) Edgestitch along the top line as shown. Serge the side lines of front. 


(10) Serge the side lines of back. 
Fold the 1cm(3/8”) from the top edge to the wrong side then  fold and press  1.5cm(9/16”) to the wrong side again. Then edge stitch the fold line. Pull the elastic band through the tunnel with the  help of a safety pin. Do a small stitch the elastic band to the beginning and end of tunnel at both sides to fix as  shown.


(11) 1.Fold 1cm(3/8”) and 1.5cm(9/16”) top edge of pocket  to the wrong side.Then edgestitch as shown. 2.Fold the rest of the edges. Iron the edges in toward  the wrong side of the fabric on each pocket. 

(12) The pocket is now ready to topstitch onto your right side of skirt. Align it based on the markings on your pattern. Stitch pockets  to the front side as shown. 


(13) Sew a parallel two row of long(gathering) stitches around the front skirt. To gather the front skirt simply hold the  fabric still in  one hand and pull one of the loose threads  with the other.  Do this on both sides until your front skirt is the same width as the front waist band. 
 (14) Match the top edges of right sides of front and front skirt. Stitch and serge them together as shown.


 (15) Press seam allowance towards top and edge stitch  as picture shown. 

(16) Sew a parallel two row of long(gathering) stitches around the  back skirt. 

(17) To gather the back skirt simply hold the  fabric still in one hand and pull one of the  loose threads  with the other. 
(18) Match the top edges of right sides of  back and back skirt.  Stitch and serge them together as shown. 




(19) Press seam allowance towards top and edge stitch for making elastic tunnel as shown. 
Pull the elastic band through the tunnel with the  help of a safety pin. Do a small stitch the elastic band to the beginning and  end of tunnel at both sides to fix as  shown.

(20) Match the front and back with right sides together. Stitch them together as shown. 
(21) Give hand stitches to the side seams. 
(22) Hand stitch the buttons as shown.  
(23) On the wrong side of skirt, fold 1cm(3/8”) and 1.5cm(9/16”)  of hem and press. 
Sew the hem as shown.

Long romper
Match the front and back with right sides together. Stitch them together as shown.

Then pin on and stitch along the inseam lines.  Serge or zigzag seams as shown.

On the wrong side of skirt, fold 1cm(3/8”) and 1.5cm(9/16”)  of hem and press. 
Sew the hem as shown.

Hand stitch the buttons as shown. 


Pants

(1) Pin and stitch the front and back side line only together as  shown. 
Right sides of fabric together. 
Press seams open.  

(2) Fold twice concealing the cut edge and press. 

(3) Sew a parallel two row of long(gathering) stitches around the frill.To gather the frill simply hold the fabric still in  one hand and pull one of the loose threads with the other. 


(4) Match the bottom edges of right sides of pants and frill. Stitch and serge them together as shown. 



(5) Pin and stitch the front and back inseam line together as shown. Right sides of fabric together. Press seams open. 




(6) Tuck the pant leg that’s right side out inside the wrong side out pant leg with the crotch part lined up. The two pant legs should have the right sides touching. Pin the curves together and sew one big U that’s the curve. This is the curve that’s from the crotch to the top of the waist. Finish seam if desired with a serger, zigzag stitch or pinking shears. 




(7) Face the right sides of waist bands . Stitch as shown, keeping opening unstitched. 

(8)Turn inside out. Fold it half. Press it along. 

(9) Face both right sides of pants and waistband. Make sure both center and side lines are matched.  
Stitch them on and zig zag or serge the seam allowance.





(10) Insert elastic band into the opening. Band fits firmly around waist. 
Overlap at ends and sew to secure as shown. Hand sewing the opening shut.

댓글