Fold twice concealing the cut edge of back pieces and press.
Sew the edges as shown.
Press 3/8″(1cm) bias bindings in lengthwise.
Now pin your bias tape to the front neckline with right side together.
Sew along the neck line as shown.
Cut half of the seam allowance along the curve.
And fold the binding to the inside of the garment, rolling the seam line in slightly to hide it on the inside of the garment. Fold the raw edge of the binding under along the line you pressed earlier, and pin this fold to the inside of the neck line. Continue to press the binding to the other side. Topstitch the binding to the neck line close to the inside fold.
Pin and sew the shoulders together with right sides of fabric together.
Serge or zigzag stitch the shoulders as shown.
Press seams towards back.
Fold twice concealing the cut edge of frill (straight line) and press. Sew the hem as shown.
Sew a parallel row of long (gathering) stitches around the frill.
(Stitch length long, tension low/loose)
Gathering the frill.
Stitch the frills to the armhole line with right sides together as shown.
Serge or zigzag stitch the seams as shown.
Press the seams towards bodice.
Give the edge stitch as shown.
Sew a parallel row of long(gathering) stitches around the front bottom piece(skirt).
(Stitch length long, tension low/loose) Gathering the top edge of front bottom piece(skirt).
To gather the front bottom piece(skirt) fabric simply hold the fabric still in one hand and pull one of the loose threads with the other. Do this on both sides until your front bottom piece(skirt) is the same width as the each waist.
Repeat with the other piece.
Align the front bottom piece(skirt) and front top piece right sides together.
Pin all the way around waist line and sew as shown. Serge or do zigzag the raw edge.
Give the edge stitch on the waist line as shown.
Fold the 1cm(3/8”) from the top edge of back bottom piece(skirt)to the wrong side then fold and press 1.5cm(9/16”) to the wrong side again. Then edge stitch the fold line.
Pull the elastic band through the tunnel with the help of a safety pin. Do a small stitch the elastic band to the beginning and end of tunnel at both sides to fix as shown.
First of all, match the front top and back top with right sides together.
After then match the back back bottom piece(skirt) from back skirt starting point on the back top piece to the front piece with right sides together as shown.
Stitch side line together as shown. And Serge or do zigzag the raw edge.
Press seams towards back.
Give small stitch on the back side as shown.
댓글
댓글 쓰기