Sewing tutorial-23. R68 sewing pattern-Button placket pants

The front pieces should have the right sides facing each other.
Stitch them as picture shown. Serger the seam allowance as shown.




Press center front for making front flat as shown .
 Top stitch the red lines to the right side of front as shown

Face the right sides of front and back together. 
Pin on and stitch along the side lines and from clotch to the both ankle hem.
Sereg or zigzag seams at the edge as picture shown.

Turn it inside out.

On the wrong side of pants, fold 1cm(3/8”) and fold the 1.5cm(5/8”) from the bottom edge to the wrong side pants  and sew edges as shown. 


Match the waist bands together. Face the right sides.  Stitch as shown, keeping opening unstitched. Press seams open.

Fold your waist-band in half horlizontally. And fold 1cm(3/8”) inside & press at the bottom

Pin the waist band to the pants all around the waist and sew along the waist lines as shown.

Fold the waist band down lengthwise along the pressed fold. 
Top stitch along the bottom of the waist band (about 1/8 inch from the seam between the waistband and the pants), making sure you're catching the insideof the waist band.

Insert elastic band into the opening. Band fits firmly around waist. Overlap at ends and sew to secure as shown. Close the openings with stitching.


Hand stitch the buttons as shown. 



 

댓글