(1) Face the right sides of bodice together. Pin on and stitch along the side lines.
Serge or zigzag side line at the edge as shown. Press seams towards back.
(2) Face the right sides of front and back of frills together and stitch them together.
(3) Serge or zigzag stitch the side lines of frill together as picture.
(4) On the wrong side of frill, fold h'em line of frill twice(0.5cm/1/4inch)X2 concealing the cut edge and press. Sew the hem as shown.
(5) To press the strap, fold it in half, press. Then open it and fold the edges to the center, press. And fold approximately 3/8”(1cm) one side of strap in widthwise. Then fold the strap in half one more time and press. Next you'll topstitch along long edge and short edge of the strap as shown.
(6) Pin the straps in place on the wrong side of bodice.
(7) Face the right side of frill and wrong side of bodice together.
Match the top edge of frill and bodice as shown.
Sew the top edge of bodice all the way around as shown.
(8) Turn bodice wrong side out.
Sew 3/8” from the folded edge.
Be sure to leave about 3cm (1 1/4inch) opening so that you can feed your elastic.
(9) Insert elastic band into the opening.
Overlap elastic band at ends and sew to secure as shown. Sew the opening shut.
(10) Pin and stitch the front and back side line together as shown. Right sides of fabric together.
(11) Once you sew the inner leg portion of the pants, flip one of the legs right side out. Tuck the pant leg that’s right side out inside the wrong side out pant leg with the crotch part lined up. The two pant legs should have the right sides touching. Pin the curves together and sew one big U that’s the curve. This is the curve that’s from the crotch to the top of the waist, Finish seam if desired with a serger, zigzag stitch or pinking shears.
(12) On the wrong side of pants, fold 1cm(3/8”) and fold the 2.5cm(1”) from the bottom edge to the wrong side pants and sew a two parallel stitches as shown.
Then again be sure to leave about 3cm(1 1/4inch) opening so that you can feed your elastic.
Insert elastic band into the opening.
Overlap elastic band at ends and sew to secure as shown. Sew the opening shut.
(13) Match the bodice to pants waist line with right sides.
(14) Align the bodice and pants right sides together.
Pin all the way around waist line and sew 2.5cm(1”) from the edge as shown.
Serge or do zigzag the raw edge.
(15) Press waist seams toward top(bodice).
You have to Edge stitch over this along the fold – you will be sewing through all the layers from the top. Be sure to leave about 3cm (1 1/4") opening so that you can feed your elastic.
Insert elastic band into the opening.
Sew the opening shut.
Overlap elastic band at ends and sew to secure as shown.
댓글
댓글 쓰기