(1) Serge or zigzag stitch out-curve line of placket as shown. Working from the right side of the garment, pin and sew snap placket to garment aligning the raw edges of crotch line as shown.
(2) Trim and grade seam allowance as shown.
(3) Fold the snap placket to the wrong side, and pin this fold to the inside of the front and back.
(4) Topstitch the snap placket to the front and back close to the inside fold.
(5) Serge or zigzag stitch the edge line of hem as shown.
(6)Fold 1.5cm/5/8inch of hem and press. Sew the hem around as shown.
(7) Pull the elastic band trough the tunnel with the help of a safety pin.
Do a small stitch the elastic band to the beginning and end of leg line at both sides to secure
as picture shown.
(8) Add snaps to the front and back placket as shown. Repeat on the other side.
Sewing pattern files from link below 👇
댓글
댓글 쓰기