1. Dress with sleeves
(1) Pin and sew the shoulders of front
and back together with right sides of fabric together.
Serge or zigzag stitch the shoulders together as shown.
Press seams towards the back.
(2) Sew a parallel a row of long(gathering) stitches around the frill as shown.
(3) Gathering the frill.
(4) Match the top edge of frills and neck line of bodice as shown.
Please leave 2cm(3/4") of each frill edge on the top as picture shown.
(5) Baste stitch frill and neck line together as shown.
(6) Apply interfacing to the wrong side of facing pieces as shown.
(7) Match facing pieces up at the shoulder seams, pin together and stitch.
(8) Press seams open.
(9) Serge or zig-zag stitch out curve of facing
(10) Then pin the facing to the neckline and front line, with right sides together. Sew them together along front line and the top of the neckline with a nice curve as shown.
(11) Trim the points on any sharp angles and cut notches in the seam allowance along the curve.
(12) Turn it inside out, press the neck-line. and Give the top stitching as shown.
(13) On the wrong side of sleeves, fold twice concealing the cut edge and press.
Sew the hem of sleeve as shown.
(14) Mark elastic placement line on inside of garment piece. Place elastic band 2.5cm(1”) from bottom edge of sleeves.
Place elastic over marked line on wrong side of fabric.
(15) Stitch sleeves and armhole together as shown. Serge them together.
(16) Pin and stitch the front and back together as shown, right sides of fabric together.
Serge or overlock them together.
(17) Make the 4 button holes as shown.
(18) Using your CF (center front line) as a guide, lay your right piece overlapping the left piece and pin in place. Sew the baste stitch.
Hand stitching buttons as shown.
(19) Now pleat the skirts. Use pins to secure them then iron press them to keep the shape.
Keep repeating this pleating process from the left to the right sides.
(20) For ease of work, sew a sparsely spread out stitch along the top of the pleated cloth to hold the pleats together.
(21) Face the right sides of skirt together. Pin on and stitch along the side lines. Serge or zigzag red line at the edge as shown. Press seams towards back.
(22) Match the skirt to bodice waist line with right sides together as picture shown.
(23) Align the skirt and bodice right sides together. Pin all the way around waist line and sew as shown. Serge or do zigzag the raw edge.
(24) On the wrong side of hem, fold 1cm(3/8") and 1.5cm(5/8") concealing the cut edge and press. Sew the hem of skirt as shown.
2. Sleeveless dress
(1) Fold neck frill twice concealing the cut edge and press.
(2) Sew a parallel two row of long(gathering) stitches around the frill as shown.
(3) Gathering the frill.
(4) Pin and sew the shoulders of front and back together with right sides of fabric together.
Press seams open. Repeat with lining pieces as shown.
(5) Please leave 2cm(3/4") of each frill edge on the top as picture shown.
Baste stitch frill and neck line together as shown.
(6) You should have 2 seperate fronts and backs now (one is outer fabric, the other one is lining fabric). Now with the right sides of the fronts and backs facing each other, sew along the neck line and front as shown.
The things that will be left unsewn is the hem line arm hole line and side lines as shown.
(7) Trim the points on any sharp angles.
(8) Turn it inside out.
(9) Fold front and back together properly, with the right sides out, matching up the side seams.
Pin together side seams, with the lining right sides together and the outer fabric right sides together. You will need to lift up the outer fabric front and back over the armsyce seam to be able to pin them. Sew.
Repeat for both sides. Press.
(10) Make the 4 button holes as shown.
Using your CF (center front line) as a guide, lay your right piece overlapping the left piece and pin in place. Sew the baste
3. Romper
Do the top part step of dress.
Pleat the bottom part. Use pins to secure them then iron press them to keep the shape.
Keep repeating this pleating process from the left to the right sides.
For ease of work, sew a sparsely spread out stitch along the top of the pleated cloth to hold the pleats together.
Serge or do zigzag the leg line.
On the wrong side of leg line, fold 1.5cm/5/8inch concealing the cut edge
and press as shown.
And edge stitch along the leg line as shown.
Pull the elastic band trough the tunnel with the help of a safety pin. Do a small stitch the elastic band to the begining and end of leg line at both sides to fix as picture shown.
Serge or do zigzag the raw edge of snap button placket.
On the wrong side of placket, fold 2cm/3/4 inch once concealing the cut edge and press.
Sew the croth line as shown. Repeat with the other side.
Add snaps to the front and back placket.
댓글
댓글 쓰기