1. Dress
Apply interfacing to the wrong side of back.
Fold the 1cm(3/8”) from the raw edge to the wrong side of front.
And fold and press 3cm(1.2”) to the wrong side of front again.
Repeat with the other piece.
Then edge stitch button placket as shown. Repeat with the other piece.
Make the button holes as shown.
Using your CF (center front line) as a guide, lay your right piece overlapping the left piece and pin in place. Sew the baste stitch.
Sew a parallel row of long (gathering) stitches around the top edge line of skirt.
(Stitch length long, tension low/loose)
To gather the skirt fabric simply hold the fabric still in one hand and pull one of the loose threads with the other.
Do this on both sides until your skirt is the same width as the each front and back.
Match the front to front skirt with right sides together as picture shown.
Repeat with the other side.
Pin and sew the dress, right sides together. Serge or zigzag stitch seams together.
On the wrong side of skirt, fold twice concealing the cut edge and press. Sew the hem as shown.
Pin and sew the front shoulder yoke and back shoulder yoke together
with right sides of fabric together.
Serge or zigzag stitch the edges as shown.
Press the seams to one side.
Fold 0.5cm(3/16”) twice concealing the cut edge of frill and press.
Sew the hem as shown.
Sew a parallel row of long(gathering) stitches around the frill.
(Stitch length long, tension low/loose)
Gathering the frill as picture. Stitch the frills to the shoulder yoke with right sides together as shown.
Serge or zigzag stitch the edges as shown.
Press the seams to one side.
Stitch the shoulder yoke with frills to the bodice (front and back)
with right sides together as shown.
Press the seams to bodice(front and back side).
Give the edge stitch on the seams as shown.
Press 1cm(3/8") bias bindings in lengthwise.
Leave 1cm(3/8") both edge of binding. Working from the right side of the garment,
pin and sew binding to garment aligning the raw edges as shown.
Fold the extra 1cm(3/8") binding to the inside of the garment.
And fold the binding to the inside of the garment, rolling the seam line in slightly to hide it on the inside of the garment.
Fold the raw edge of the binding under along the line you pressed earlier,
and pin this fold to the inside of the neck line.
Continue to press the binding to the other side.
Topstitch the binding to the neck line close to the inside fold.
Hand stitch buttons on the back.
2. Romper
Sew a parallel row of long (gathering) stitches around the top edge line of romper.
(Stitch length long, tension low/loose)
To gather the romper fabric simply hold the fabric still in one hand and pull one of the loose threads with the other.
Do this on both sides until your romper is the same width as the each front and back.
Match the front to front romper with right sides together as picture shown.
Repeat with the other side.
Apply interfacing to the wrong side of front & back button placket (4cm/1.6” wide).
Pin and stitch the front and back together as shown, right sides of fabric together.
Serge or overlock them together.
Pin and sew the front shoulder yoke and back shoulder yoke together
with right sides of fabric together.
Serge or zigzag stitch the edges as shown.
Press the seams to one side.
Fold 0.5cm(3/16”) twice concealing the cut edge of frill and press.
Sew the hem as shown.
Sew a parallel row of long(gathering) stitches around the frill.
(Stitch length long, tension low/loose)
Gathering the frill as picture. Stitch the frills to the shoulder yoke with right sides together as shown.
Serge or zigzag stitch the edges as shown.
Press the seams to one side.
Stitch the shoulder yoke with frills to the bodice (front and back)
with right sides together as shown.
Press the seams to bodice(front and back side).
Give the edge stitch on the seams as shown.
Serge or do zigzag the leg line.
On the wrong side of leg line, fold 1.5cm/5/8inch concealing the cut edge and press as shown.
And edge stitch along the leg line as shown.
Pull the elastic band trough the tunnel with the help of a safety pin.
Do a small stitch the elastic band to the beginning and end of leg line at both sides to fix as picture shown.
On the wrong side of placket, fold 2cm/3/4 inch twice concealing the cut edge and press.
Sew the croth line as shown. Repeat with the other side.
Add snaps to the front and back placket.
3. Bloomer
Sew the front and back bloomers together at the side seams and the crotch seam right sides together.
Fold the hem facings in half and sew the ends together with a ½” seam allowance right sides together.
Press seams open.
Pin the seam of one of your hem facing pieces to the crotch seam of your flutter bloomers right sides together.
Pin them the rest of the way. Repeat for the other side.
Sew this right sides together.
Now iron a fold at the seams so that your facings are folded toward the wrong side of your bloomers.
Sew a line 1cm(3/8") away from each of the leg holes.
Fold a 0.6cm(¼”) toward the back on the remaining facing and pin it down.
Sew along the edge of the fold but leave a little unsewn hole at the side seam.
Stop your line of stitching about 2cm (3/4”) before you reach the point where you began this leaves you an entrance hole to access your elastic band tunnel.
Pull the elastic band trough the tunnel with the help of a safety pin. Lap the ends of the elastic by half inch and stitch them together.
Hand sewing the opening shut.
Fold the 1cm(3/8”) from the top edge to the wrong side of bloomer.
And fold and press 4cm(1.8”) to the wrong side of bloomer again.
Sew along the edge of the fold but leave a little unsewn hole at the side seam.
Stop your line of stitching about 2cm (3/4”) before you reach the point where you began this leaves you an entrance hole to access your elastic band tunnel.
Sew 2cm(3/4") from the top of the waist band, all the way around to create a casing for elastic.
Insert elastic band into the opening. Band fits firmly around waist.
Overlap at ends and sew to secure as shown.
Hand sewing the opening shut.
댓글
댓글 쓰기