Sewing tutorial-35. R79 sewing pattern

1. Top

Pin and sew the shoulders together as shown. Right sides of fabric together.

Serge or zigzag stitch the shoulders together.

Press the seams to the front.

Stitch sleeves and armhole together as shown. Serge them together.

Pin and stitch the front and back together as shown, right sides of fabric together. Serge or overlock them together.

Turn the piece right-side-out. 

Fold button loop diagonally. And stitch as shown. 

Trim the rest.

Turn it inside out.

 Keep the button loop right side of collar edge and pin in place as shown.

Give a basting stitch as shown.

Match the collars together.  Face the right sides.

Pin & sew across the top edge the collars. 

Cut notches in the seam allowance along the curve as shown.

Turn the piece right-side-out. Press the edges. 

Place the right side edge of the collar down to the neck line edge as shown.

 The collar should extend 3/8inch(1cm) beyond the stay stitching line.

Stitch, starting at stay stitching line.

Clip into corners of stay stitching.

Overlapping left neck edge over right neck edge.

Stitch side edges of the collar to the front of the neck as shown in the picture.

Serge or do zigzag the raw edge.

Fold the cuff in half, right sides together, matching side edges. Stitch.

 Fold the cuff wrong sides together, forming a tube. Repeat with other hem band.

Place the hem band right sides together with the front and back, matching the seams and aligning  raw edges. 

Stitch around the hem line. Serge or do zigzag the raw edge.

Place the cuffs right sides together with the sleeves, 

matching the seams and aligning  raw edges. 

Stitch around the cuffs. Serge or do zigzag the raw edge.

2. Dress

Face the right sides of front skirt and back skirt together and stitch side seams together. 

Press the seams to the front.

On the wrong side of skirt, fold 0.6cm(1/4”) twice concealing the cut edge and press. 

Sew the hem as shown.

Match the top edge of the circle hem to bottom edge of bodice with right sides together 

as picture shown.

Pin all the way around edge line and sew as shown. Serge or do zigzag the raw edge.

3. Romper

Serge or do zigzag the leg line. 

On the wrong side of leg line,

fold 0.4”(1cm) concealing the cut edge and press as shown .

And edge stitch along the leg line as shown.

Pull the elastic band trough the tunnel with the help of a safety pin.

 Do a  stitch the elastic band to the beginning and end of leg line at both sides to secure 

as picture shown.

On the wrong side of placket, fold 0.8”(2cm) twice

concealing the cut edge and press. Sew the crotch line as shown.

Repeat with the diaper front.

Add snaps to the front and back placket.

4. Long romper

Serge or do zigzag the pocket enterance. 

Then Fold the top edge and side edge.

Place the pocket on the shirt front, aligning centers in place. 

And edge stitch the pockets as shown.

1.Pin and sew the shoulders together as shown. Right sides of fabric together.

Serge or zigzag stitch the shoulders together.

2. Stitch sleeves and armhole together as shown. Serge them together.

3. Pin and stitch the front and back together as shown, 

right sides of fabric together. Serge or overlock them together.

Serge or zigzag stitch out-curv line of placket as shown.

Working from the right side of the garment,

pin and sew snap placket to garment aligning the raw edges of crotch line as shown.

Cut notches in the seam allowance along the curve as shown.

Fold the raw edge of the snap placket under along the line you pressed earlier, 

and pin this fold to the inside of the front. 

Topstitch the snap placket to the front close to the inside fold. Repeat on the other side.

Fold the ankle band in half lengthwise with right sides together.

 Stitch both sides of short ends together as shown.

Turn the piece right-side-out. 

Match the Ankel band to the bottom edge of leg line.

Stitch, stretching ankle band so they lay flat agains the long romper as you stitch.

Add snaps to the front and back placket as shown.

Repeat on the other side.