Sew along the neck as shown.
Then edge stitch button placket as shown. Repeat with the other piece.
Pull the elastic band through the tunnel of sleeves with the help of a safety pin.
Do a small stitch the elastic band to the beginning and end of tunnel at both sides to fix as shown.
Pin and stitch the front and back together as shown, right sides of fabric together.
Serge or overlock them together.
On the wrong side ofsleeves, fold 1cm(3/8”) and fold the 2.5cm(1”) from the bottom edge to the wrong side sleeves.
And sew a two parallel stitches as shown.
Then again be sure to leave about 2cm(3/4") opening so that you can feed your elastic.
Insert elastic band into the opening.
Overlap elastic band at ends and sew to secure as shown.
Sew the opening shut.
Make the button holes as shown.
Using your CF (center front line) as a guide, lay your right piece overlapping the left piece and pin in place. Sew the baste stitch.
Sew a parallel row of long (gathering) stitches around the waist line of skirt.
(Stitch length long, tension low/loose)
To gather the skirt fabric simply hold the fabric still in one hand and pull one of the loose threads with the other. Do this on both sides until your skirt is the same width as the each waist.
Repeat with the other piece.
Face the right sides of skirt together. Pin on and stitch along the side lines.
Serge or zigzag red line at the edge as shown. Press seams towards back.
On the wrong side of hem, fold twice concealing the cut edge and press.
Sew the hem of skirt as shown.
Match the skirt to bodice waist line with right sides together as picture shown.
Align the skirt and bodice right sides together.
Pin all the way around waist line and sew as shown.
Serge or do zigzag the raw edge.
2. Romper
Repeat with making top part of dress.
Apply interfacing to the wrong side of back button placket (2.5cm/1” wide).
Sew a parallel two row of long(gathering) stitches around the front romper.
To gather the front romper simply hold the fabric still in one hand and pull one of the loose threads with the other.
Match the top edges of right sides of front and front romper.
Stitch and serge them together as shown.
Face the right sides of front romper pants and back romper pants together. Pin on and stitch along the side lines. Serge or zigzag red line at the edge as shown. Press seams towards back.
Serge or do zigzag the raw edge of leg line as shown.
On the wrong side of leg line, fold 1.25cm/1/2inch concealing the cut edge and press as shown.
And edge stitch along the leg line as shown.
Pull the elastic band trough the tunnel with the help of a safety pin.
Do a small stitch the elasticband to the begining and end of leg line at both sides to fix as picture shown.
And Serge or do zigzag the raw edge of snap button placket.
On the wrong side of placket, fold 2.5cm(5/8 inch) once concealing the cut edge
and press.
Sew the croth line as shown. Repeat with the other side.
Match the romper to bodice waist line with right sides together as picture shown.
Align the romper and bodice right sides together.
Pin all the way around waist line and sew as shown.
Serge or do zigzag the raw edge.
Add snaps to the front and back placket.
3. All in one pants
Apply interfacing to the wrong side of front and back.
Fold top edge of front and back twice -1.25cm(1/2") concealing the cut edge and press.
Fold top edge of sleeves twice -1.25cm(1/2") concealing the cut edge and press.
Match the each sleeves to the Front and Back as picture shown.
Stitch as shown, keeping opening unstitched.
Serge together before unstitched line starts.
Fold top edge of front, back and sleeves twice -1.25cm(1/2") concealing the cut edge and press. Sew along the neck as shown.
Pull the elastic band through the tunnel of sleeves with the help of a safety pin.
Do a small stitch the elastic band to the beginning and end of tunnel at both sides to fix as shown.
Pin and stitch the front and back together as shown, right sides of fabric together.
Serge or overlock them together.
On the wrong side of sleeves, fold 1cm(3/8”) and fold the 2.5cm(1”) from the bottom edge to the wrong side sleeves.
And sew a two parallel stitches as shown.
Then again be sure to leave about 2cm(3/4") opening so that you can feed your elastic.
Insert elastic band into the opening.
Overlap elastic band at ends and sew to secure as shown. Sew the opening shut.
Pin and stitch the front and back side line together as shown.
Right sides of fabric together.
Once you sew the inner leg portion of the pants, flip one of the legs right side out.
Tuck the pant leg that’s right side out inside the wrong side out pant leg with the crotch part lined up.
The two pant legs should have the right sides touching.
Pin the curves together and sew one big U that’s the curve. This is the curve that’s from the crotch to the top of the waist,
Finish seam if desired with a serger, zigzag stitch or pinking shears.
Match the bodice to pants waist line with right sides
Align the bodice and pants right sides together.
Pin all the way around waist line and sew 2.5cm(1”) from the edge as shown.
Serge or do zigzag the raw edge.
Press waist seams toward top(bodice).
You have to Edge stitch over this along the fold– you will be sewing through all the layers from the top.
Be sure to leave about 3cm(1.2") opening so that you can feed your elastic.
Insert elastic band into the opening.
Overlap elastic band at ends and sew to secure as shown.
Sew the opening shut.
On the wrong side of pants, fold 1cm(3/8”) and fold the 2.5cm(1”) from the bottom edge to the wrong side pants
and sew a two parallel stitches as shown.
Then again be sure to leave about 3cm(1.2") opening so that you can feed your elastic.
Insert elastic band into the opening. Overlap elastic band at ends and sew to secure as shown.
Sew the opening shut.
4.Pants
Pin and stitch the front and back side line only together as shown.
Right sides of fabric together.
Press seams open.
Fold twice concealing the cut edge and press.
(3) Sew a parallel two row of long(gathering) stitches around the frill.
To gather the frill simply hold the fabric still in one hand and pull one of the loose threads with the other.
Match the bottom edges of right sides of pants and frill.
Stitch and serge them together as shown.
press seams to upward. Topstitch the seams on.
Pin and stitch the front and back inseam line together as shown. Right sides of fabric together. Press seams open.
Tuck the pant leg that’s right side out inside the wrong side out pant leg with the crotch part lined up. The two pant legs should have the right sides touching.
Pin the curves together and sew one big U that’s the curve. This is the curve that’s from the crotch to the top of the waist. Finish seam if desired with a serger, zigzag stitch or pinking shears.
Face the right sides of waist bands . Stitch as shown, keeping opening unstitched
Turn inside out. Fold it half. Press it along.
Face both right sides of pants and waistband.
Make sure both center and side lines are matched.
Stitch them on and zig zag or serge the seam allowance.
Sew 2cm(3/4") from the top of the waist band, all the way around to create a casing for elastic.
Insert elastic band into the opening. Band fits firmly around waist.
Overlap at ends and sew to secure as shown. Hand sewing the opening shut.
댓글
댓글 쓰기