1. Dress/ Blouse
Apply interfacing to the wrong side of back button placket (1cm/3/8” wide).
Zigzag stitch or serge the edge go back line as shown.
Pin the back pieces together as shown, right sides of fabric together.
Stitch the back center seam from bottom edge to where the slit ends.
Press center front seams open.
Sew a parallel row of long (gathering) stitches around the waist line of skirt.
(Stitch length long, tension low/loose)
To gather the skirt fabric simply hold the fabric still in one hand and pull one of the loose threads with the other. Do this on both sides until your skirt is the same width as the each waist.
Repeat with the other piece.
Match the front skirt top edge to front bodice bottom edge with right sides together as picture shown.
Pin all the way around matching line and sew as shown. Serge or do zigzag the raw edge.
Repeat with the back pieces as front pieces.
Pin and sew the shoulders of front
and back together with right sides of fabric together.
Serge or zigzag stitch the shoulders together as shown.
Press seams towards the front.
Fold back frill twice concealing the cut edge and press. Sew the side and hem as shown.
Sew a parallel two row of long(gathering) stitches around the frill.
Gathering the frill.
Fold 1cm(3/8inch) of back raw edge to the to the right side as shown.
Match the top edge of collar and bodice as shown. Stitch collar and bodice together as shown. Serge them together.
Turn the back(button placket) inside out. Then press the seams down along the neck line
and pin seams down. Edge stitch the seam as shown.
Fold suspender loop diagonally. And stitch as shown.
Trim the rest.
Turn it inside out.
Keep the button loop inside the placket edge and pin in place.
Topstitch the back slit as shown.
Sew a parallel row of long(gathering) stitches around the top sleeve.
(Stitch length long, tension low/loose) Gathering the top edge of sleeve.
On the wrong side of sleeves, fold twice concealing the cut edge and press.
Sew the hem of sleeve as shown.
1. Mark elastic placement line on inside of garment piece. 2. Place no cut elastic over marked line on wrong side of fabric. 3.Stitch over elastic. Stretch elastic while stitching. When you reach the mark, simply continue stitching over elastic.
Stitch sleeves and armhole together as shown. Serge them together.
Pin and stitch the front and back together as shown, right sides of fabric together.
Serge or overlock them together.
Serge side seams of 3 skirt frill pieces as shown.
Sew a parallel row of long (gathering) stitches around the top edge line of frill.
(Stitch length long, tension low/loose)
To gather the frill fabric simply hold the fabric still in one hand and pull one of the loose threads with the other. Do this on both sides until your frill is the same width as the each bottom edge of skirt. Repeat with the other piece.
Face the right sides of frill together. Pin on and stitch along the side lines. Serge or zigzag red line at the edge as shown. Press seams towards back.
On the wrong side of frill, fold twice concealing the cut edge and press. Sew the hem as shown.
Match the frill to skirt bottom edge line with right sides together as picture shown.
Align the skirt and frill right sides together. Pin all the way around bottom edge line and sew as shown. Serge or do zigzag the raw edge.
Hand stitch the buttons.
2. Romper
Pin and stitch the front and back together as shown, right sides of fabric together.
Serge or overlock them together.
Serge or do zigzag the leg line.
On the wrong side of leg line, fold 1cm/3/8inch concealing the cut edge and press as shown.
And edge stitch along the leg line as shown.
Pull the elastic band trough the tunnel with the help of a safety pin.
Do a small stitch the elastic band to the beginning and end of leg line at both sides to fix as picture shown.
On the wrong side of placket, fold 2cm/3/4 inch twice concealing the cut edge and press.
Sew the croth line as shown. Repeat with the other side.
Add snaps to the front and back placket.
댓글
댓글 쓰기